MTI Relative Strength Assessment Training Plan
$49.00
- 5x Week, 5x day/week Strength – Emphasis Training Cycle
- Designed specifically to improve your results on the MTI Relative Strength Assessment
- This training plan is one of the 450+ Plans included with an Athlete’s Subscription.
Description
Relative Strength Assessment Training Plan Overview
This plan is designed specifically to develop strength results from the MTI Relative Strength Assessment. It has a heavy strength focus, utilizing a density format 3 days/week a week. You will also train Work Capacity and Chassis Integrity 1 day/ week, and easy endurance 1 day/week in this 5/day, 5 week training program.
The plan focus is to increase your 1-Repetition Maximum (1RM) for the Hinge Lift, Front Squat and Bench Press. You will also train to increase your max number of strict Pull Ups.
This is Version 3 of this Plan, Updated August, 2023
MTI Relative Strength Assessment
This assessment and scoring standards were updated, January 2021.
Warm Up:
(1) 3 Rounds
Barbell Complex @ 45/65#
Instep Stretch
Lat + Pec Stretch
(2) Get on a scale and weigh yourself
Training:
(1) Work up to 1RM Front Squat (1RM = 1 Repetition Maximum)
(2) Max Rep Strict Pull Ups (no kipping, bucking, jerking, etc.)
(3) Work up to 1RM Hinge Lift
(4) Work up to 1RM Bench Press
Record 1RM’s, max pull ups reps, and Bodyweight.
Scoring:
Add together your finishing loads for front squat, hinge lift and bench press.
For pulling strength, multiply your max rep pull up times 10% of your bodyweight.
For example, if you weigh 200 pounds, and get 12 pull ups, you’d multiply 10% of 200 (200 x .1 = 20) and 12.
20×12 = 240.
** Note on Pull Ups … the Max Number you can use for scoring for this assessment is 20. So even if you tested at 25x pullups, the most you can use for your scoring is 20.
Add your pulling strength total to your other 1RM’s, and divide by your bodyweight. The final number is your score.
SCORING EXAMPLE #1:
Male Army Infantryman ….
-
- Bodyweight – 201 lb
- 1RM Front Squat – 275 lb
- 1RM Bench Press – 275 lb
- 1RM Hinge Lift – 435 lb
- Max Rep Pull Ups – 22
Pull up scoring maxes out at 20 reps. So, 10% of Bodyweight x 20 Reps … 201 x .10 = 20.1 x 20 pull up reps = 402
275 – Front Squat 1RM
275 – Bench Press 1RM
435 – Hinge Lift 1RM
402 – Pull Up Score
1,387 / 201 (bodyweight) = 6.9, or “Excellent” for Tactical Athletes.
SCORING EXAMPLE #2:
Male Mountain Athlete ….
-
- Bodyweight – 182 lb
- 1RM Front Squat – 215 lb
- 1RM Bench Press – 185 lb
- 1RM Hinge Lift – 285 lb
- Max Rep Pull Ups – 13
Pull up scoring … 10% of Bodyweight x 13 Reps … 182 x .10 = 18.2 x 13 pull up reps = 236.6
215 – Front Squat 1RM
185 – Bench Press 1RM
285 – Hinge Lift 1RM
236.6 – Pull Up Score
921.6 / 182 (bodyweight) = 5.06, or “Good” for Mountain Athletes.
In general, we want professional mountain athletes and all tactical athletes to score “Good” or better on this assessment.
Strength Programming
This plan uses MTI’s Density Strength Progression to train strength. The Density Strength progression uses percentages based off your 1-Rep Max, with working rounds to be completed in a prescribed amount of time.
Training Example:
- 5 Rounds, every 90 Seconds
- 4x Power Clean @ 85% 1RM
If your 1-Rep Max for Front Squat is 200#, you will use 170# for all 5 Rounds (200 x 85% = 170).
Set a running clock. Every 90 seconds, complete 4x reps of the exercise. Rest the remainder of that time. Repeat once the 90 seconds is up. The entire effort should take 7:30 min.
In addition to density programming, you’ll take the full Relative Strength Assessment 3 times … week 1, 3 and 5.
Work Capacity & Chassis Integrity
Tuesdays each week you’ll train short work capacity (10 minute) via single mode exercise (shuttle sprints, for example) and Chassis Integrity (functional core). The Chassis Integrity circuits include a total, rotational, anti-rotational, and extension exercise.
Endurance
Trained once per week on Thursdays via an easy-pace 3-4 mile run.
TRAINING SCEDULE
- Monday: MTI Relative Strength Assessment or Density Strength
- Tuesday: Short Work Capacity, Chassis Integrity
- Wednesday: Density Strength
- Thursday: Endurance – 3-4 mile easy run
- Friday: Density Strength
REQUIRED EQUIPMENT
- Stopwatch
- Fully equipped functional fitness gym with barbells, plyo boxes, racks, bench for bench press, pull up bar, kettlebells and/or dumbbells, plyo boxes, etc.
COMMON QUESTIONS
How long should the training session take?
In general, all sessions should take approximately 60 minutes to complete.
Why are there two numbers listed for the exercises with assigned loads?
The lower weight is the prescribed weight for women, and the higher is for men, for example, 5x Scotty Bobs at 15/25# means women use 15# dumbbells and men use 25# dumbbellls.
What does 3/5x Pull ups mean?
The first number is for women, second for men. So women do 3x pull ups, and men do 5x pull ups.
What if my gym doesn’t have kettlebells?
Substitute dumbbells at the same weight. For example, if the session calls for a pair of 16kg kettlebells, use 35# dumbbells.
What if I am unfamiliar with an exercise?
A complete list and video demonstration of our exercises can be found here: http://mtntactical.com/resources/exercise-menu/
More Questions?
Contact: rob@militaryathlete.com
DISCLAIMER
Before beginning any exercise program, consult with your physician to ensure that you are in proper health. Physical training contains inherent risks including, but not limited to, muscle strains, tears, physical and bodily injury up to and including death. This training program is not meant to provide medical advice; you should obtain medical advice from your private health care practitioner. If you are unable to assume these risks then you should not engage in this training program. No liability is assumed by Mountain Tactical Institute, Inc, its owners or employees, and you train at your own risk. Mountain Tactical Institute makes no warranty, express or implied, of any kind in connection with this training program.
Required Equipment
- What Equipment is Required?
- Fully-equipped functional fitness gym including racks, barbells, bumper plate, dummbells/kettlebells, plyo boxes, slam balls and sandbag.
- Stopwatch with repeating countdown timer
Sample Training
SESSION 1
Obj: Relative Strength Assessment
Warm Up:
3 Rounds
Barbell Complex @ 45/65#
Get on a scale and weigh yourself
Training:
(1) Work up to 1RM Hinge Lift
(2) Work up to 1RM Bench Press
(3) Work up to 1RM Front Squat
(4) Max Rep Strict Pull Ups (no kipping, bucking, jerking, etc.)
RECORD RESULTS. SEE NOTES FOR SCORING
************
SESSION 2
Obj: Work Cap
4 Rounds
- 5x Push ups
- 5x Burpees
- 6x 40ft Shuttle Run
- Instep Stretch
Training:
(1) 10 Rounds every 60 seconds
(2) 15 Minute Grind
- 5x Turkish Get Up @ 25/35#
- 10x Standing Slasher @ 25/35#
- 45 Second 1-Arm Farmers Carry @ 45/55#
- 15/15 Standing Founder
***********
SESSION 3
Obj: Strength
Warm Up:
3 Rounds
- Bronc Complex @ 45/65#
- Instep Stretch
- Lat + Pec Stretch
Use your SESSION 1 results to calculate today's loading and pull up reps.
Training:
(1) 4x Hinge Lift @ 50% 1RM, then...4x Hinge Lift @ 75% 1RM
Then...
5 Rounds, every 90 Seconds
- 4x Hinge Lift @ 80% 1RM
(2) 4x Bench Press @ 50% 1RM, then...4x Bench Press @ 75% 1RM
Then...
5 Rounds, every 90 Seconds
- 4x Bench Press @ 80% 1RM
(3) 4x Front Squat @ 50% 1RM, then...4x Front Squat @ 75% 1RM
Then...
5 Rounds, Every 90 Seconds
4x Front Squat @ 80% 1RM
(4) 5 Rounds every 90 seconds
- Pull-Ups @ 30% of your assessment max
(5) 3 Rounds
***********
SESSION 4
Obj: Endurance
(1) 3 Mile run at Easy Pace
(2) Foam Roll Legs, Low Back
*****************
SESSION 5
Obj: Strength
Warm up:
3 Rounds
- Bronc Complex @ 45/65#
- Instep Stretch
- Lat + Pec Stretch
Use your SESSION 1 results to caclulate today's loading and pull up reps.
Training:
(1) 4x Hinge Lift @ 50% 1RM, then...4x Hinge Lift @ 75% 1RM
Then...
5 Rounds, every 90 Seconds
- 4x Hinge Lift @ 80% 1RM
(2) 4x Bench Press @ 50% 1RM, then...4x Bench Press @ 75% 1RM
Then...
5 Rounds, every 90 Seconds
- 4x Bench Press @ 80% 1RM
(3) 4x Front Squat @ 50% 1RM, then...4x Front Squat @ 75% 1RM
Then...
5 Rounds, Every 90 Seconds
- 4x Front Squat @ 80% 1RM
(4) 5 Rounds every 90 seconds
- Pull-Ups @ 30% of your assessment max
(5) 3 Rounds
Testimonials
Thanks for all you do
Body Weight Day 1: 170 vs. Final: 168
Front Squat Day 1: 205 vs. Final: 235
Pull Up Day 1: 18 vs. Final: 19
Clean Day 1: 175 vs. Final: 195
Bench Day 1: 205 vs. Final: 215
Score Day 1: 4.70 vs. Final: 5.17
Our Stuff Works. Guaranteed.
Athlete's Subscription Package
Need all access programming? The Athlete Subscription gives you 450+ Plans and 4 Daily Programming Streams.