Pingora Work Capacity + Power Climb Cycle
$29.00
• 6 weeks, 4 days/week
• Climb-specific work capacity and power
• Second plan in series of three (Warbonnet, Pingora, Watchtower)
• This training plan is one of the 182+ Plans included with an Athlete’s Subscription.
Description
The following is a 6-week program dedicated to increasing work capacity and power for rock climbers. It is the second 6-week block of training following our WARBONNET: STRENGTH AND POWER training plan. It uses the same assessment and system. As such, almost every aspect of the plan is individualized based on an assessment you’ll do during the first session. Using assessments allows the plan to always scale itself to your current ability.
Perform this program when you have 6 weeks to dedicate to training without worrying about performance. It’s very intense, and even at about an hour a session, it’ll most likely be all you need to do for training. We highly recommend that you perform it directly after completing WARBONNET and taking one week of complete rest.
Why is this a Legacy Plan?
We’ve evolved our climbing programming since this plan was build. Our most recent programming is simpler to implement, but still as effective.
Required Equipment
You’ll need the required equipment (below) as well as proper landing mats to catch falls. This program can be done at most rock climbing gyms or on personal climbing equipment (Moon board, homemade technical/system board). You’ll need sloping holds of some sort in close vertical proximity. For slopers, we use 4” PVC pipe with non-skid tape for grip. It’s cheap, easy, and effective.
Required Equipment
- • Boulder problems made either on your climbing board or on an actual bouldering wall.
- • Campus Board
- • Sloping holds like ribs, bolle, woody or composite slopers, or PVC pipe with non-skid tape (12” long).
- • Sandbag (40# for women, 60# for men)
- • 5/10# (female/male) dumbbells for Eccentrics (elbow durability movement)
- • Pack you can put 25# into for loaded Step-ups
Sample Training
SESSION 6: Obj: Climb Work Capacity
Warm-up:
- 3 Rounds2x Tech Board Lengths
- 4x Campus Board Lengths
- 5x In-place Lunges
- Instep Stretch
Training:
(1) 5 Rounds
2 min. 3x boulder problem at grade according to the 14 MINUTE BOULDER WORK CAPACITY PROGRESSION TABLE - WEEK 2
(2) 3 Rounds
20 sec. Calf Raise
10 sec. Hold in “up” position
20 sec. Calf Raise
10 sec. Hold in “up” position
60 sec. Rest
(3) 5 Rounds
2 min. @ 60% Campus Board Moves
2 min. Rest
SESSION 7: Obj: Strength + Power
Warm-up:
4 Rounds
- 2x Campus Board Laps - ladder - feet on
- 2x Campus Board Laps - double clutch -feet on
- 2x Tech Board Lengths
- 5x Walking Lunges
- Ultimate Wrist + Hip Flexor Stretch
- Training:
(1) 3 Rounds
1x Offset Lock and Reach - 1 rung offset. Reach with lower hand
1x Offset Lock and Reach - 1 rung offset. Reach with upper hand
Switch offset and repeat for each arm.
50x Step-ups with 25# weight vest
Ultimate Elbow Stretch
(2) 3 Rounds
Ladder up and down board - one rung at a time
50x Step-ups with 25# vest
Lat + Pec Stretch
(3) 3 Rounds
Dyno (Double Clutch) - use feet if necessary - up up down, one rung at a time.
Our Stuff Works. Guaranteed.
Athlete's Subscription Package
Need all access programming? The Athlete Subscription gives you 450+ Plans and 13x Daily Programming Streams.
